Buy Online

The PEAK 2008 measuring microscopes are focused by turning the coaxial tube. Available with magnification factors of 25, 50, 75 and 100x. The eyepiece can be focused on the scale, which, in contrast to the 2034 series, is not installed in the eyepiece. The measuring scale is installed separately above the tube. The top half of the tube can be screwed off for easy replacement of the measuring scale. The scale can be rotated inside the microscope making it unnecessary to turn the entire instrument.  Two additional scales are available (see metric or inch) and an eight megapixel, miniature USB camera can be attached to the eyepiece allowing images to be saved on a laptop or PC.  Click here to view technical data sheet.

One of the primary advantages of the PEAK 2034 measuring microscope is its easy handling. Simply set the microscope on the field to be measured and focus – that’s all. Thanks to the clear acrylic base the surface to be inspected can be view from all sides, making it easy to find the point to be measured. Focusing is accomplished by coaxial rotation of the tube. The short light path through the microscope makes the object appear reversed.  An eight megapixel, miniature USB camera can be attached to the eyepiece allowing images to be saved on a laptop or PC.  Click to view technical data sheet.

The 2034 series microscopes are available as a special model with coaxial illumination (Köhler illumination). This additional illumination is reflected into the light beam from the side by a system of prisms. This prevents irritating reflections particularly with highly glossy materials. This coaxial illumination is absolutely essential to check surface structures on smooth materials or for high contrast reproduction of colour pigments. The battery box included with the microscope contains two 1.5 Volt AA batteries and has a potentiometer to adjust the light intensity.

The PEAK 2054 measuring microscopes differ from the 2034 series in that they have an aluminium base, modified focusing mechanism and non-reversed view of the object. An additional prism reverses the light path inside the microscope.  The upright view of the test point makes it easier to spot defects.  The 2054-EIM series microscopes are particularly suitable for inspecting paint finishes in the automotive industry. Quick focusing with hand wheel and rack-and-pinion drive provides a significant advantage on active production lines.  A sturdy aluminium base ensures stability even for the standard version. If desired an acrylic base is available to improve the visibility of the point to be checked. The optical system is identical with the 2034 and 2054-EIM series stand microscopes.  An eight megapixel, miniature USB camera can be attached to the eyepiece allowing images to be saved on a laptop or PC.  Click here to view technical data sheet.

An eight megapixel, miniature USB camera with integrated lens and autofocus feature can be attached simply to the eyepiece of our PEAK microscopes (type 2008, 2034 & 2054) with the aid of an adapter. This allows images to be saved quickly on a laptop or PC. It is possible to use either the original camera driver software (in English only) or combine the system with the Metric BE software (image visualisation and storage), which offers significantly more convenient operation. The quality of the images obtained with this high end industrial camera are impressive.

PEAK M-830-S  Monocular completes our range of high quality microscopes at the request of many customers .  This impressive stand microscope has a visible area with 25x magnification, a non-reversed image and a scale with division of 0.2mm.  Practical uses include a stand microscope, telescope, a reading aid or straight forward quality control.

PEAK Interchangeable eyepiece for 2034 & 2054-EIM microscopes with millimetre graduation.  All eyepiece have a magnification factor of 10x. The built-in scale is calculated to match the lens. The scale can be focused separately in the eyepiece. The eye cup is already included with the stand microscope ordered.

An illumination unit is offered as an important accessory for the PEAK 2008 microscope. It facilitates measurements on dark surfaces as well as under poor light conditions. Power is supplied by two 1.5 Volt AA batteries (not included). It is necessary to screw out the acrylic base to install the illumination unit. The light then fits from above into the acrylic base and arrests in a retaining groove. The large contact surface of the unit also increases the stability of the entire microscope/illumination unit combination.

PEAK 2034 and 2054-EIM series microscopes offer the possibility of changing the magnification factor by changing lenses. Four additional depressions are already present in the standard transport boxes for secure transportation of interchangeable lenses. The lenses have a screw thread for extremely simple changing. However the measuring scales require particular attention. If, for example, a microscope with a magnification factor of 100x is used with a 0.01 mm scale, the reading is incorrect when the lens is changed. For this reason, always order the additional lens you intend to use for measurement together with the associated eyepiece. It is not necessary to change the eyepiece for simple visual checking.

PEAK Measuring Scales for 2008 Microscope (inch version). The scales shown below have incrementation in inches and, in addition, angle graduations.  The Inch increments are for 25x = 0.005“, 50x 0.002“, 75x 0.001“ and 100x 0.0005“.

PEAK Measuring Scales for 2008 Microscope (metric version).  These four scales include the standard incrementation and, in addition, various angle graduations (metric version)

The CV-Mini 2034 tripod was designed to allow inspection and measurements without contact using the 2034 microscope. The aluminium extension arm can be rotated 360° on the VA shaft. An additional micro-adjustment is integrated into the extension arm. The 20 mm aluminium bottom plates is anodised and has dimensions of 230 x 150 mm. Larger support plates can be produced as special products. The microscope with tripod is supplied together with an elegant synthetic transport case (only when ordered as set).

Special MKH tripod for 2034, 2054 and 2054-EIM series microscopes.  Provides stability on rollers, curved surfaces or in combination with a digital camera.  Support rollers coated with silicone-free material.  The microscopes are screwed to the tripod with a union nut. The MKH is also available as a special model with rotating support rollers.

Special MST tripod for 2034-CIL, 2034-EIM-CIL, 2054-CIL and 2054-EIM-CIL series microscopes. The coaxial illumination limits the focusing range of the CIL microscopes. The mounts for the support rollers are adjustable laterally to maintain the working distance for all interchangeable lenses. The MST is also available as a special mode with rolling support rollers.

The X-adjustment in the MST tripod is a further option. The 5 mm adjustment range helps to evaluated adjacent measuring points precisely at high magnification factors. The X-adjustment is not possible in combination with rolling support rollers.

The tripod for the 2034-CIL-ZX depth measuring microscope can also be used for all 2034 series microscopes. In addition to 5 mm X adjustment this tripod system has a worm drive for micro-focussing. It is necessary to modify the microscope bodies for use of the MST-ZX.  Modification is included in the tripod price.

Precision tripod with segment columns, which can be installed to obtain the required distance. An X-Y table with two 25 mm measuring spindles with graduations of .01 mm is mounted in the tripod. The ST-CIL tripod can be used for combining microscopes 2034 or 2054 with the MST tripod. The MST tripod is also available with an additional rotating table.