Buy Online

Calibration certificate for crack magnifier RL  in compliance with UKAS.  To be ordered with relevant magnifer when required.  Your magnifier will be sent to a certified laboratory and delivered with calibration certificate.  Normally requires 10 working days for delivery. View sample certificate here.

Calibration certificate for measuring magnifier 2052 in compliance with UKAS. To be ordered with relevant magnifer when required. Your magnifier will be sent to a certified laboratory and delivered with calibration certificate. Normally requires 10 working days for delivery. View sample certificate here.

Optional LED illumination accessory for Crack magnifier type RL.  The retaining ring can simply be pushed over the body of the crack magnifier and arrested with the knurled screw on the side. The bright LED illumination has a battery life of approximately 50 hours (3 button cells type AG 13).

An illumination unit is available as a optional accessory for the PEAK zoom magnifiers type 1983, 2044 & 2028. Batteries not included.

An eight megapixel, miniature USB camera with integrated lens and autofocus feature can be attached simply to the eyepiece of our PEAK microscopes (type 2008, 2034 & 2054) with the aid of an adapter. This allows images to be saved quickly on a laptop or PC. It is possible to use either the original camera driver software (in English only) or combine the system with the Metric BE software (image visualisation and storage), which offers significantly more convenient operation. The quality of the images obtained with this high end industrial camera are impressive. For full technical details download technical data sheet here.

Replacement acrylic base for PEAK 2008 series microscopes

Spare Acrylic Tube for Peak Measuring Magnifiers 2015, 1983, 2004, 1049 & 2028.  Every tube has a male thread at each end. One end is screwed into the optical unit and the other end holds the threaded ring with measuring scale

Spare LED bulb for CPV-I Colour Proofing Viewer

Replacement Light for microscope type 2008, 2034 & 2054 with illumination holder and magnifiers type 2016-L, 2055-L and 2037-L. Replace by simply pulling out old light and inserting new light (batteries not included).

PEAK Interchangeable eyepiece for 2034 & 2054-EIM microscopes with millimetre graduation.  All eyepiece have a magnification factor of 10x. The built-in scale is calculated to match the lens. The scale can be focused separately in the eyepiece. The eye cup is already included with the stand microscope ordered.

An illumination unit is offered as an important accessory for the PEAK 2008 microscope. It facilitates measurements on dark surfaces as well as under poor light conditions. Power is supplied by two 1.5 Volt AA batteries (not included). It is necessary to screw out the acrylic base to install the illumination unit. The light then fits from above into the acrylic base and arrests in a retaining groove. The large contact surface of the unit also increases the stability of the entire microscope/illumination unit combination.

PEAK 2034 and 2054-EIM series microscopes offer the possibility of changing the magnification factor by changing lenses. Four additional depressions are already present in the standard transport boxes for secure transportation of interchangeable lenses. The lenses have a screw thread for extremely simple changing. However the measuring scales require particular attention. If, for example, a microscope with a magnification factor of 100x is used with a 0.01 mm scale, the reading is incorrect when the lens is changed. For this reason, always order the additional lens you intend to use for measurement together with the associated eyepiece. It is not necessary to change the eyepiece for simple visual checking.

Spare PEAK glass measuring scales in black for measuring magnifiers 2015, 1975, 1976, 1998, 1999.  Scale diameter 26 mm, glass thickness 1.26 mm

PEAK Measuring Scales for 2008 Microscope (inch version). The scales shown below have incrementation in inches and, in addition, angle graduations.  The Inch increments are for 25x = 0.005“, 50x 0.002“, 75x 0.001“ and 100x 0.0005“.

PEAK Measuring Scales for 2008 Microscope (metric version).  These four scales include the standard incrementation and, in addition, various angle graduations (metric version)

Spare PEAK glass measuring scales in white for magnifiers 2015, 1975, 1976, 1998, 1999. Scale diameter 26 mm, glass thickness 1.26 mm.  For better representation on the screen, the glass scales are shown in black with white lettering.

Spare PEAK glass measuring scales in black for measuring magnifiers 1983, 2004, 2028, 2049.  Scale diameter 35 mm, glass thickness 1.28 mm

Spare PEAK glass measuring scales in white for magnifiers 1983, 2004, 2028 & 2049. Scale diameter 35 mm, glass thickness 1.28 mm.  For better representation on the screen, the glass scales are shown in black with white lettering.

Spare Peak glass measuring scales in black for measuring magnifiers 2016, and 2016-L.  Scale diameter 26 mm, glass thickness 1.26 mm

Spare Peak glass measuring scales in white for measuring magnifiers 2016, and 2016-L.  Scale diameter 26 mm, glass thickness 1.26 mm

Spare PEAK glass measuring scales in black for measuring magnifiers 2037.  Scale diameter 26 mm, glass thickness 1.26 mm

Spare PEAK glass measuring scales in white for measuring magnifiers 2037.  Scale diameter 26 mm, glass thickness 1.26 mm

Spare Peak glass measuring scales in black for measuring magnifiers 2055, and 2055-L.  Scale diameter 26 mm, glass thickness 1.26 mm

Spare Peak glass measuring scales in white for measuring magnifiers 2055, and 2055-L.  Scale diameter 26 mm, glass thickness 1.26 mm

Spare tubes for LPT & LPT-B magnifying lamps

The CV-Mini 2034 tripod was designed to allow inspection and measurements without contact using the 2034 microscope. The aluminium extension arm can be rotated 360° on the VA shaft. An additional micro-adjustment is integrated into the extension arm. The 20 mm aluminium bottom plates is anodised and has dimensions of 230 x 150 mm. Larger support plates can be produced as special products. The microscope with tripod is supplied together with an elegant synthetic transport case (only when ordered as set).

Special MKH tripod for 2034, 2054 and 2054-EIM series microscopes.  Provides stability on rollers, curved surfaces or in combination with a digital camera.  Support rollers coated with silicone-free material.  The microscopes are screwed to the tripod with a union nut. The MKH is also available as a special model with rotating support rollers.

Special MST tripod for 2034-CIL, 2034-EIM-CIL, 2054-CIL and 2054-EIM-CIL series microscopes. The coaxial illumination limits the focusing range of the CIL microscopes. The mounts for the support rollers are adjustable laterally to maintain the working distance for all interchangeable lenses. The MST is also available as a special mode with rolling support rollers.

The X-adjustment in the MST tripod is a further option. The 5 mm adjustment range helps to evaluated adjacent measuring points precisely at high magnification factors. The X-adjustment is not possible in combination with rolling support rollers.

The tripod for the 2034-CIL-ZX depth measuring microscope can also be used for all 2034 series microscopes. In addition to 5 mm X adjustment this tripod system has a worm drive for micro-focussing. It is necessary to modify the microscope bodies for use of the MST-ZX.  Modification is included in the tripod price.

Precision tripod with segment columns, which can be installed to obtain the required distance. An X-Y table with two 25 mm measuring spindles with graduations of .01 mm is mounted in the tripod. The ST-CIL tripod can be used for combining microscopes 2034 or 2054 with the MST tripod. The MST tripod is also available with an additional rotating table.